| |
Milwaukee Hammers
|
|
 |
Milwaukee 1/2in.-Capacity Magnum Dual Torque Hammer Drill Kit, Model 5371-6
For small-hole drilling up to 1/2in., the MILWAUKEE Magnum Hammer Drill is all the tool you ll want. Lightweight enough for effective overhead drilling. Powerful 5.5 Amp motorTrigger speed control in two ranges: 0-1000 RPM, 0-20,000 BPM, 0-2500 RPM, 0-50,000 BPM, reversingDual Range Speed Control allows operator to choose higher speed with lower torque or slower speed and more torque, depending on size and type of fastener or bit and the material drilledTwo modes of operation: hammer with rotation or rotation onlyCan be used to drive concrete screw fasteners used in many installation operationsUnique brush cartridge system stores spare carbon brushes in the handle; only a screwdriver needed to replace worn brushesLightweight 53/4 pounds and well-balanced design3-wire Quik-Lok detachable cordIncludes tool, steel carrying case, percussion bit set, side handle, keyed chuck and depth gaugeModel 5371-6U.S.A.
Related Keywords: Electric Drills |
More Info on Milwaukee 1/2in.-Capacity Magnum Dual Torque Hammer Drill Kit, Model 5371-6 |
 |
Milwaukee 3/8in. Pistol Grip Hammer Drill, Model# 5392-6
Powerful 5.0 amp motor Trigger speed control: 0-2500 RPM, 0-50,000 BPM, reversing For drilling in wood with flat boring bits, hole saws, auger bits, and selfeed bits For drilling in steel with twist bits and in concrete with percussion bits Impact-resistant, non-conductive motor housing and handle Side handle can be used on either side and with or without depth gauge Self-stop brush system Includes tool, keyed chuck, side handle and depth gauge Model 5392-6; U.S.A.
Related Keywords: Electric Drills |
More Info on Milwaukee 3/8in. Pistol Grip Hammer Drill, Model# 5392-6 |
 |
Milwaukee 11/2in. SDS-max Rotary Hammer
Quick-change bit holder Powerful 11.0 Amp motor with Electronic Feedback Control Circuit385 RPM; 3,400 BPMSDS-Max drive1-1/2in. solid bit capacity, 6in. thin wall core bit capacityStop rotation mode for chipping and self drilling anchors24 chisel positions8ft. rubber cordExtra-large steel carrying case holds 23in. long bitsModel 5314-21U.S.A.
Related Keywords: saws,shears,sanders,presses,wrenches |
More Info on Milwaukee 11/2in. SDS-max Rotary Hammer |
 |
Milwaukee 1/2in. D-Handle Hammer Drill with Case, Model 5399
Heavy-duty D-Handle hammer drill can handle the toughest drilling of 1/2in. holes in concrete. Powerful 6.2 amp motorTrigger speed control: 0-950 RPM, 0-19,000 BPM, reversingWith Speed Control, the operator can control start up speed and avoid bit walk, making hole positioning more accurateFor drilling in wood with flat boring bits, hole saws, auger bits, and selfeed bitsFor drilling in steel up to 1/2in., 7/8in. soft masonry or 5/8in. hard masonrySelf-stop brush systemIncludes tool, steel carrying case, keyed chuck, side handle and depth gaugeModel 5399U.S.A.
Related Keywords: saws,shears,sanders,presses,wrenches |
More Info on Milwaukee 1/2in. D-Handle Hammer Drill with Case, Model 5399 |
 |
Milwaukee 1/2in. Magnum Hammer Drill, Model 5374-1
For small-hole drilling up to 1/2in., the MILWAUKEE Magnum Hammer Drill is all the tool you ll want. Lightweight for effective overhead drilling. Powerful 5.5 Amp motorVariable speed control: 0-2500 RPM, 0-50,000 BPMWith rotation with hammering mode only, this tool can be used for drilling in concrete onlyUnique brush cartridge system stores spare carbon brushes in the handle; only a screwdriver needed to replace worn brushesLightweight 53/4 pounds and well-balanced design3-wire Quik-Lok detachable cordIncludes tool, side handle, keyed chuck and depth gaugeModel 5374-1U.S.A.
Related Keywords: saws,shears,sanders,presses,wrenches |
More Info on Milwaukee 1/2in. Magnum Hammer Drill, Model 5374-1 |
 |
Milwaukee Heavy-Duty Breaker Hammer
71 pound breaker hammer handles the toughest demolition jobsT-handles featured for operator control44ft./lb. of blow energy; 1400 BPM15 Amp, 120 Volt AC/DC; double insulatedTop position switch eliminates accidental activationFoot-operated bit lockUses 1 in. hex air tool steel or 1 in. hex notched steelLimited lifetime warrantyModel# 5338
Related Keywords: saws,shears,sanders,presses,wrenches |
More Info on Milwaukee Heavy-Duty Breaker Hammer |
 |
Milwaukee 3/8in. Pistol Grip Hammer Drill with Case and Bits, Model 5397-6
This heavy-duty pistol grip hammer drill can handle the toughest drilling of 3/8in. holes in concrete and for overhead drilling. Powerful 5.0 amp motorTrigger speed control: 0-2500 RPM, 0-50,000 BPM, reversingWith Speed Control, the operator can control start up speed and avoid bit walk, making hole positioning more accurateFor drilling in wood with flat boring bits, hole saws, auger bits, and selfeed bitsFor drilling in steel with twist bits and in concrete with percussion bitsImpact-resistant, non-conductive motor housing and handleSide handle can be used on either side and with or without depth gaugeSelf-stop brush systemIncludes tool, steel carrying case, keyed chuck, side handle, depth gauge and percussion bits: 3/16in. x 3in., 1/4in. x 4in., 5/16in. x 4in., 3/8in. x 4in.Model 5397-6U.S.A.
Related Keywords: saws,shears,sanders,presses,wrenches |
More Info on Milwaukee 3/8in. Pistol Grip Hammer Drill with Case and Bits, Model 5397-6 |
 |
Milwaukee 1/2in.-Capacity Magnum Dual Torque Hammer Drill with Case, Model 5371-21
For small-hole drilling up to 1/2in., the MILWAUKEE Magnum Hammer Drill is all the tool you ll want. Lightweight enough for effective overhead drilling. Powerful 5.5 Amp motorTrigger speed control in two ranges: 0-1000 RPM, 0-20,000 BPM, 0-2500 RPM, 0-50,000 BPM, reversingDual Range Speed Control allows operator to choose higher speed with lower torque or slower speed and more torque, depending on size and type of fastener or bit and the material drilledTwo modes of operation: hammer with rotation or rotation onlyCan be used to drive concrete screw fasteners used in many installation operationsUnique brush cartridge system stores spare carbon brushes in the handle; only a screwdriver needed to replace worn brushesLightweight 5-3/4 pounds and well-balanced design3-wire Quik-Lok detachable cordIncludes tool, heavy-duty plastic carrying case, side handle, keyed chuck and depth gaugeModel 5371-21U.S.A.
Related Keywords: saws,shears,sanders,presses,wrenches |
More Info on Milwaukee 1/2in.-Capacity Magnum Dual Torque Hammer Drill with Case, Model 5371-21 |
 |
Milwaukee 1/2 in. Pistol Grip Dual Torque Hammer Drill with Case, Model 5378-21
This heavy-duty pistol grip hammer drill can handle the toughest drilling of 1/2in. holes in concrete. Powerful 7.5 Amp motor; double insulatedTrigger speed control in two ranges: 0-1350 RPM, 0-22,000 BPM, 0-2500 RPM, 0-40,000 BPM, reversingDual Range Speed Control allows operator to choose higher speed with lower torque or slower speed and more torque, depending on size and type of fastener or bit and the material drilledHammer with rotation or rotation onlyFor drilling in wood, with flat boring bits, hole saws, auger bits, and selfeed bitsUse to drill in steel with twist bits and in concrete with percussion bitsSelf-stop brush system10ft. rubber cordIncludes tool, impact-resistant carrying case, side handle, keyless chuck and depth gaugeModel 5378-21U.S.A.
Related Keywords: saws,shears,sanders,presses,wrenches |
More Info on Milwaukee 1/2 in. Pistol Grip Dual Torque Hammer Drill with Case, Model 5378-21 |
 |
Milwaukee 11/8in. SDS Drive L-Shape Rotary Hammer with Removable Bit Holder, Model 5360-21
Powerful 7.4 Amp motor provides power for a hard-hitting 2.5ft.-lbs. of energy per blowVariable speed: 0-980 RPM; 0-4200 BPMQuick-change removable bit holder for optional 3-jaw chuck11/8in. solid bit capacity, 31/2in. thin wall core bit capacity in concrete or 4in. capacity in masonry blockTool can be used for drilling in steel, wood or concreteThree modes of operation: rotation with hammering, hammer-only and rotation-onlySpeed control switch allows operator controlled starts for less bit walk resulting in more accurate hole positioningSlip clutch stops rotary action when a bit jams, protecting mechanism from overloadD-style rear handle provides a secure, comfortable gripTwo-finger speed control trigger switchDouble insulated, 2-wire cordLightweight, compact 14in. length and well-balanced designIncludes impact resistant carrying case, side handle, and depth gaugeModel 5360-21U.S.A.
Related Keywords: saws,shears,sanders,presses,wrenches |
More Info on Milwaukee 11/8in. SDS Drive L-Shape Rotary Hammer with Removable Bit Holder, Model 5360-21 |
 |
Milwaukee 1/2in. Magnum Hammer Drill with Keyless Chuck, Case and Bits, Model 5377-6
For small-hole drilling up to 1/2in., the MILWAUKEE Magnum Hammer Drill is all the tool you ll want. Lightweight for effective overhead drilling. Powerful 5.5 Amp motorTrigger speed control in two ranges: 0-1000 RPM, 0-20,000 BPM, 0-2500 RPM, 0-50,000 BPM, reversingDual Range Speed Control allows operator to choose higher speed with lower torque or slower speed and more torque, depending on size and type of fastener or bit and the material drilledTwo modes of operation for drilling in steel, wood or concreteCan be used to drive concrete screw fasteners used in many installation operationsUnique brush cartridge system stores spare carbon brushes in the handle; only a screwdriver needed to replace worn brushesLightweight 53/4 pounds and well-balanced designQuik#&150;Lok detachable cordIncludes tool, steel carrying case, side handle, keyless chuck, depth gauge, and percussion bits: 3/16in. x 3in., 1/4in. x 4in., 5/16in. x 4in., 3/8in. x 4in.Model 5377-6U.S.A.
Related Keywords: saws,shears,sanders,presses,wrenches |
More Info on Milwaukee 1/2in. Magnum Hammer Drill with Keyless Chuck, Case and Bits, Model 5377-6 |
 |
Milwaukee 1/2in. Capacity Magnum Dual Torque Hammer Drill, Model#5370-6
Powerful 5.5 Amp motor Trigger speed control in two ranges: 0-1000 RPM, 0-20,000 BPM, 0-2500 RPM, 0-50,000 BPM, reversing Dual Range Speed Control Two modes of operation: hammer with rotation or rotation only Unique brush cartridge system Lightweight 5 3/4 pounds and well-balanced design 3-wire Quik-Lok detachable cord Includes tool, side handle, keyed chuck and depth gauge Model 5370-6; U.S.A.
Related Keywords: Electric Drills |
More Info on Milwaukee 1/2in. Capacity Magnum Dual Torque Hammer Drill, Model#5370-6 |
 |
Milwaukee 11/2in. SDS-max Rotary Hammer
Patented Vibration Isolation System (both grips) reduces operator fatigueQuick-change bit holderA Soft-Shift stop rotation knob permits operator to smoothly change from hammer-with-rotation mode to the hammer-only modePowerful 11.0 Amp motor with Electronic Feedback Control CircuitDial speed control: 190-385 RPM, 1700-3400 BPMSDS-Max drive1-1/2in. solid bit capacity, 6in. thin wall core bit capacityA pre-set clutch protects against sudden motor overloadsService reminder light indicates when carbon brushes need replacingQuik-Lok cordIncludes extra-large steel carrying case and side handle with depth gaugeModel 5315-21U.S.A.
Related Keywords: saws,shears,sanders,presses,wrenches |
More Info on Milwaukee 11/2in. SDS-max Rotary Hammer |
 |
Milwaukee 1/2 in. Pistol Grip Dual Torque Hammer Drill, Model 5378-20
This heavy-duty pistol grip hammer drill can handle the toughest drilling of 1/2in. holes in concrete. Powerful 7.5 Amp motor; double insulatedTrigger speed control in two ranges: 0-1350 RPM, 0-22,000 BPM, 0-2500 RPM, 0-40,000 BPM, reversingDual Range Speed Control allows operator to choose higher speed with lower torque or slower speed and more torque, depending on size and type of fastener or bit and the material drilledHammer with rotation or rotation onlyFor drilling in wood, with flat boring bits, hole saws, auger bits, and selfeed bitsUse to drill in steel with twist bits and in concrete with percussion bitsSelf-stop brush system10ft. rubber cordIncludes tool, side handle, keyless chuck and depth gaugeModel 5378-20
Related Keywords: saws,shears,sanders,presses,wrenches |
More Info on Milwaukee 1/2 in. Pistol Grip Dual Torque Hammer Drill, Model 5378-20 |
 |
Milwaukee 11/2in. Spline Drive Rotary Hammer Kit, Model 5321-22
Patented Vibration Isolation System (both grips) reduces operator fatigueQuick-change bit holderPowerful 11.0 Amp motor with Electronic Feedback Control CircuitDial speed control: 190-385 RPM, 1700-3400 BPMSoft-Shift Stop Rotation knob permits operator to change from hammer-with-rotation mode to the hammer-only modeStop rotation for self-drill anchors1-1/2in. solid bit capacity, 6in. thin wall core bit capacityA pre-set clutch protects against sudden motor overloadsService reminder light indicates when carbon brushes need replacingQuik-Lok cord; power indicator lightIncludes extra-large steel carrying case, side handle with depth gauge, chisels, bits and adapter shankModel 5321-22U.S.A.
Related Keywords: saws,shears,sanders,presses,wrenches |
More Info on Milwaukee 11/2in. Spline Drive Rotary Hammer Kit, Model 5321-22 |
 |
Milwaukee 7/8in.-Capacity SDS Drive D&3150;Handle Rotary Hammer Kit with Case and Bits, Model 5368-22
For small to medium hole drilling (up to 7/8in. diameter), the D-Handle grip is the best for overhead drilling. Powerful 7.2 Amp Milwaukee motorErgonomically designed for user comfortA side handle provides effective control while the depth rod allows the operator to drill a hole or a series of holes to a specific repeatable depthVariable speed: 0-1100 RPM, 0-5000 BPM, reversingSpeed Control allows smooth controlled starts and less bit walk for accurate hole positioningTwo modes of operation: hammer with rotation or rotation onlySlip clutch stops rotary actionDrills up to 7/8in. solid bit capacity, 2in. core bit capacityLightweight 61/2 pounds, compact 15in. length and well-balanced design8ft. double-insulated rubber cordIncludes tool, 5-piece 44 Magnum premium SDS bit set, heavy-duty impact-resistant plastic carrying case, side handle and depth gaugeModel 5368-22U.S.A.
Related Keywords: saws,shears,sanders,presses,wrenches |
More Info on Milwaukee 7/8in.-Capacity SDS Drive D&3150;Handle Rotary Hammer Kit with Case and Bits, Model 5368-22 |
 |
Milwaukee 11/2in. SDS-max Rotary Hammer Kit
Patented Vibration Isolation System (both grips) reduces operator fatigueQuick-change bit holderA Soft-Shift stop rotation knob permits operator to smoothly change from hammer-with-rotation mode to the hammer-only modePowerful 11.0 Amp motor with Electronic Feedback Control CircuitDial speed control: 190-385 RPM, 1700-3400 BPMSDS-Max drive1-1/2in. solid bit capacity, 6in. thin wall core bit capacityA pre-set clutch protects against sudden motor overloadsService reminder light indicates when carbon brushes need replacingQuik-Lok cordIncludes extra-large steel carrying case, side handle with depth gauge, chisels, bits and adapter shankModel 5315-22U.S.A.
Related Keywords: saws,shears,sanders,presses,wrenches |
More Info on Milwaukee 11/2in. SDS-max Rotary Hammer Kit |
 |
Milwaukee 1in. SDS Drive L-Shape Rotary Hammer
Powerful 6 Amp motorD-style rear handle2-finger trigger switch0-900 RPM, 0-4500 BPM, reversingDrills up to 1in. solid bit capacity in concrete; 3 in. holes in concreteTwo modes of operation: hammer with rotation or rotation onlyIncludes tool, steel carrying case, side handle and depth gaugeModel 5362-6U.S.A.
Related Keywords: saws,shears,sanders,presses,wrenches |
More Info on Milwaukee 1in. SDS Drive L-Shape Rotary Hammer |
 |
Milwaukee 18 Volt 3/4in. Rotary Hammer Kit, Model 5361-24
Includes tool, 2.4Ah battery, charger, side handle, depth gauge and carry casePowerful 18V Rare Earth motor easily handles all drilling applications2.4Ah batteryDrills up to 54 holes 1/4in. by 11/2in. deep on a single battery chargeUses industry-standard SDS-Plus and TE-C Style bitsTwo modes of operation for drilling in steel, wood or concreteUse rotation only when drilling in wood or steelUse rotation with hammering when drilling in concreteModel 5361-24U.S.A.
Related Keywords: saws,shears,sanders,presses,wrenches |
More Info on Milwaukee 18 Volt 3/4in. Rotary Hammer Kit, Model 5361-24 |
|
|
|
Tools - Pressure Washers - Generators: Milwaukee Hammers