| |
Hammers
|
|
 |
Rubber Sledge Hammer
Ideal for aligning bricks or paver without damaging or marring the surface. Rubber head with wood handle. Factory shipped.
Related Keywords: claw,deadblow,sledge,pein,brass |
More Info on Rubber Sledge Hammer |
 |
23-Oz. Blue Max Framer Hammer with Axe Handle
Framer hammer with top-grade hickory handle. Magnetic nail starter holds 16d and 20d nails. Exclusive triple-wedge design for secure head-to-handle bonding. Axe handle design. Smooth face for finish work and non-marring blows. Limited lifetime warranty. U.S.A.
Related Keywords: claw,deadblow,sledge,pein,brass |
More Info on 23-Oz. Blue Max Framer Hammer with Axe Handle |
 |
Northern Industrial Tools 2 Lb. Dead Blow Hammer
Soft face dead blow hammer. U.S.A.
Related Keywords: claw,deadblow,sledge,pein,brass |
More Info on Northern Industrial Tools 2 Lb. Dead Blow Hammer |
 |
KDTools Soft Face Hammer
Molded plastic soft face hammer with hard and soft replaceable tips is ideal for striking objects without marring. 11 5/8in. L, weighs 15 oz. U.S.A.
Related Keywords: claw,deadblow,sledge,pein,brass |
More Info on KDTools Soft Face Hammer |
 |
10 LB Dead Blow Hammer
Sand filled head deadens blows, rubber face will not mark or mar work surface. 39 in. long handle with rubber grip. 7 3/4 in. L x 3 1/4 in. dia. head.
Related Keywords: claw,deadblow,sledge,pein,brass |
More Info on 10 LB Dead Blow Hammer |
 |
24 oz. Brass Hammer
Solid brass head, high impact fiberglass handle with rubber grip. Head Size 24 oz
Related Keywords: claw,deadblow,sledge,pein,brass |
More Info on 24 oz. Brass Hammer |
 |
Chicago Pneumatic Heavy-Duty Air Hammer Kit, Model# CP-715K
Most powerful hammer in its class For rivet and bolt cutting, bushing driving, and overall front end work Up to 2100 BPM Longer piston strokes for more force per blow 3.5 CFM average air consumption; 1/4in. air inlet Integral muffler minimizes exhaust sound Includes 4 chisels and impact-resistant carrying case Model CP-715K
Related Keywords: BPM,trigger,regulator,shank,chipping |
More Info on Chicago Pneumatic Heavy-Duty Air Hammer Kit, Model# CP-715K |
 |
Milwaukee 1in. SDS Drive L-Shape Rotary Hammer
Powerful 6 Amp motorD-style rear handle2-finger trigger switch0-900 RPM, 0-4500 BPM, reversingDrills up to 1in. solid bit capacity in concrete; 3 in. holes in concreteTwo modes of operation: hammer with rotation or rotation onlyIncludes tool, steel carrying case, side handle and depth gaugeModel 5362-6U.S.A.
Related Keywords: saws,shears,sanders,presses,wrenches |
More Info on Milwaukee 1in. SDS Drive L-Shape Rotary Hammer |
 |
22-Oz. FatMax Framing Hammer with Plain Face
One-piece double forged steel head and handle offer superior swing and durability. Patented tuning fork design reduces harmful vibrations. Plain face. Ergonomically designed handle for multiple grip positions and less fatigue. Rubber grip molded directly onto shaft; specially textured handle grip for improved performance, even when wet. Limited lifetime warranty.
Related Keywords: claw,deadblow,sledge,pein,brass |
More Info on 22-Oz. FatMax Framing Hammer with Plain Face |
 |
Northern Industrial Tools 20oz. Fiberglass Claw Hammer
Rubber-grip hamdle. Curved Claw
Related Keywords: claw,deadblow,sledge,pein,brass |
More Info on Northern Industrial Tools 20oz. Fiberglass Claw Hammer |
 |
Northern Industrial Tools 8-Piece Air Hammer Kit, Model# 158220
Cuts through rusted bolts, exhaust brackets and steel panels 3000 blows per minute; 2 5/8in. stroke 5.5 CFM at 90 PSI; 1/4 NPT air inlet Includes 5 hardened steel chisels with .401 shank diameter, storage case
Related Keywords: BPM,trigger,regulator,shank,chipping |
More Info on Northern Industrial Tools 8-Piece Air Hammer Kit, Model# 158220 |
 |
Metabo 15.6 Volt Cordless Hammer Drill, Model# SBT15.6 Plus
1/2in. keyless chuck 484 in.-lbs. torque 5 clutch settings plus hammer mode 2.4 Amp hour battery Includes 2 batteries, charger and case Model SBT15.6 Plus
Related Keywords: cordless,driver,hammer,compact,angle |
More Info on Metabo 15.6 Volt Cordless Hammer Drill, Model# SBT15.6 Plus |
 |
Milwaukee 11/8in. SDS Drive L-Shape Rotary Hammer with Removable Bit Holder, Model 5360-21
Powerful 7.4 Amp motor provides power for a hard-hitting 2.5ft.-lbs. of energy per blowVariable speed: 0-980 RPM; 0-4200 BPMQuick-change removable bit holder for optional 3-jaw chuck11/8in. solid bit capacity, 31/2in. thin wall core bit capacity in concrete or 4in. capacity in masonry blockTool can be used for drilling in steel, wood or concreteThree modes of operation: rotation with hammering, hammer-only and rotation-onlySpeed control switch allows operator controlled starts for less bit walk resulting in more accurate hole positioningSlip clutch stops rotary action when a bit jams, protecting mechanism from overloadD-style rear handle provides a secure, comfortable gripTwo-finger speed control trigger switchDouble insulated, 2-wire cordLightweight, compact 14in. length and well-balanced designIncludes impact resistant carrying case, side handle, and depth gaugeModel 5360-21U.S.A.
Related Keywords: saws,shears,sanders,presses,wrenches |
More Info on Milwaukee 11/8in. SDS Drive L-Shape Rotary Hammer with Removable Bit Holder, Model 5360-21 |
 |
22-Oz. FatMax Antivibe Framing Hammer
One-piece double forged steel head and handle offer superior swing and durability. Patented tuning fork design reduces harmful vibrations. Checkered face. Ergonomically designed handle for multiple grip positions and less fatigue. Rubber grip molded directly onto shaft; specially textured handle grip for improved performance, even when wet. Limited lifetime warranty.
Related Keywords: claw,deadblow,sledge,pein,brass |
More Info on 22-Oz. FatMax Antivibe Framing Hammer |
 |
Northern Industrial Tools 1in. Rotary Hammer Delivers up to 4000 BPM, Model# 143384
Choice of hammer/drilling or drilling only 0-800 no-load RPM Industrial quality aluminum body Accepts SDS bits, up to 1 3/16in. in wood, 1in. in concrete, 1/2in. in steel Side handle adjusts a full 360 Includes depth gauge, dust boot, replacement brushes, O-rings and lubricant 110 Volt, 60 Hz., 2.5 continuous Amp motor UL listed cord; molded carrying case Uses 3/8in. x 2in. Locking Shanks 2800 BPM Aluminum Body Light Green Housing 2 Pin UL Cord Surges up to 12.5 Amps
Related Keywords: Super Buys |
More Info on Northern Industrial Tools 1in. Rotary Hammer Delivers up to 4000 BPM, Model# 143384 |
 |
Northern Industrial Tools 24 Oz. Deadblow Hammer
Brass on one end, hammer on the other. Built for long lasting durability.
Related Keywords: claw,deadblow,sledge,pein,brass |
More Info on Northern Industrial Tools 24 Oz. Deadblow Hammer |
 |
Milwaukee 1/2in. Magnum Hammer Drill, Model 5374-1
For small-hole drilling up to 1/2in., the MILWAUKEE Magnum Hammer Drill is all the tool you ll want. Lightweight for effective overhead drilling. Powerful 5.5 Amp motorVariable speed control: 0-2500 RPM, 0-50,000 BPMWith rotation with hammering mode only, this tool can be used for drilling in concrete onlyUnique brush cartridge system stores spare carbon brushes in the handle; only a screwdriver needed to replace worn brushesLightweight 53/4 pounds and well-balanced design3-wire Quik-Lok detachable cordIncludes tool, side handle, keyed chuck and depth gaugeModel 5374-1U.S.A.
Related Keywords: saws,shears,sanders,presses,wrenches |
More Info on Milwaukee 1/2in. Magnum Hammer Drill, Model 5374-1 |
 |
Northern Industrial Tools 1.5Lb. Ball Pein Hammer
Durable construction with rubber-grip handle. size: 1 1/2 lbs.
Related Keywords: claw,deadblow,sledge,pein,brass |
More Info on Northern Industrial Tools 1.5Lb. Ball Pein Hammer |
 |
Milwaukee 7/8in.-Capacity SDS Drive D&3150;Handle Rotary Hammer Kit with Case and Bits, Model 5368-22
For small to medium hole drilling (up to 7/8in. diameter), the D-Handle grip is the best for overhead drilling. Powerful 7.2 Amp Milwaukee motorErgonomically designed for user comfortA side handle provides effective control while the depth rod allows the operator to drill a hole or a series of holes to a specific repeatable depthVariable speed: 0-1100 RPM, 0-5000 BPM, reversingSpeed Control allows smooth controlled starts and less bit walk for accurate hole positioningTwo modes of operation: hammer with rotation or rotation onlySlip clutch stops rotary actionDrills up to 7/8in. solid bit capacity, 2in. core bit capacityLightweight 61/2 pounds, compact 15in. length and well-balanced design8ft. double-insulated rubber cordIncludes tool, 5-piece 44 Magnum premium SDS bit set, heavy-duty impact-resistant plastic carrying case, side handle and depth gaugeModel 5368-22U.S.A.
Related Keywords: saws,shears,sanders,presses,wrenches |
More Info on Milwaukee 7/8in.-Capacity SDS Drive D&3150;Handle Rotary Hammer Kit with Case and Bits, Model 5368-22 |
 |
Milwaukee 1/2 in. Pistol Grip Dual Torque Hammer Drill with Case, Model 5378-21
This heavy-duty pistol grip hammer drill can handle the toughest drilling of 1/2in. holes in concrete. Powerful 7.5 Amp motor; double insulatedTrigger speed control in two ranges: 0-1350 RPM, 0-22,000 BPM, 0-2500 RPM, 0-40,000 BPM, reversingDual Range Speed Control allows operator to choose higher speed with lower torque or slower speed and more torque, depending on size and type of fastener or bit and the material drilledHammer with rotation or rotation onlyFor drilling in wood, with flat boring bits, hole saws, auger bits, and selfeed bitsUse to drill in steel with twist bits and in concrete with percussion bitsSelf-stop brush system10ft. rubber cordIncludes tool, impact-resistant carrying case, side handle, keyless chuck and depth gaugeModel 5378-21U.S.A.
Related Keywords: saws,shears,sanders,presses,wrenches |
More Info on Milwaukee 1/2 in. Pistol Grip Dual Torque Hammer Drill with Case, Model 5378-21 |
 |
4-Lb. Engineer s Hammer
Engineer s hammer has a hardened and tempered forged steel head. Faces machine finished. Clear lacquered hickory handle. Limited lifetime warranty. U.S.A..
Related Keywords: claw,deadblow,sledge,pein,brass |
More Info on 4-Lb. Engineer s Hammer |
 |
Milwaukee 1/2in.-Capacity Magnum Dual Torque Hammer Drill Kit, Model 5371-6
For small-hole drilling up to 1/2in., the MILWAUKEE Magnum Hammer Drill is all the tool you ll want. Lightweight enough for effective overhead drilling. Powerful 5.5 Amp motorTrigger speed control in two ranges: 0-1000 RPM, 0-20,000 BPM, 0-2500 RPM, 0-50,000 BPM, reversingDual Range Speed Control allows operator to choose higher speed with lower torque or slower speed and more torque, depending on size and type of fastener or bit and the material drilledTwo modes of operation: hammer with rotation or rotation onlyCan be used to drive concrete screw fasteners used in many installation operationsUnique brush cartridge system stores spare carbon brushes in the handle; only a screwdriver needed to replace worn brushesLightweight 53/4 pounds and well-balanced design3-wire Quik-Lok detachable cordIncludes tool, steel carrying case, percussion bit set, side handle, keyed chuck and depth gaugeModel 5371-6U.S.A.
Related Keywords: Electric Drills |
More Info on Milwaukee 1/2in.-Capacity Magnum Dual Torque Hammer Drill Kit, Model 5371-6 |
 |
Wilton Unbreakable Sledge Hammer 8-lb. 24in. Handle
Double-faced sledge hammer is indestructible. U.S.A.
Related Keywords: anvils,drains,chocks,exchangers,pullers |
More Info on Wilton Unbreakable Sledge Hammer 8-lb. 24in. Handle |
 |
4 Lb. Sledge Hammer with 16in. Hickory Handle
Premium quality sledge hammer. Drop-forged steel heads are hardened and tempered for strength. Milled striking face. U.S.A. Olympia
Related Keywords: claw,deadblow,sledge,pein,brass |
More Info on 4 Lb. Sledge Hammer with 16in. Hickory Handle |
|
|
|
Tools - Pressure Washers - Generators: Hammers